Soundwise.org - QuikSR20's Rig

HK AVR510 reciever

Sony DVP-NS400D DVD

Klipsch SB-3 Mains

Klipsch SC-1 Center

Klipsch Quintet Rears

Klipsch KSW-12 Sub

Microsoft X-Box with advanced AV pack

AR Proseries Interconnects for everything

Well I finally got a chance to take some pictures of my Home Theater setup. This is my first crack at a home theater but from hangin around here and reading magazines I have learned a lot and for the budget Im on for a 23 year old student I think I did pretty good. It sounds Awesome. I took lots of time to setup the angles and positioning of the speakers and sub, As well as the

time to wire everything nice and neat and use loom to cover wires on the floor. For wires I chose acoustic research they seemed to be a decent wire for the money. I also used bannana clips on all the connectors to the reciever and speakers. Heres a List of the parts and the pictures Enjoy.

This shot just shows a picture across the front. The TV is centered in the middle. The Speakers are SB3's on 21' Wood Tech Oak Stands with rubber isolations pads on top and metal spikes on bottom.

My Rack is a TECH Craft TC-WF45B from there wing series. Heres a list of the components. HK AVR510 reciever, Sony NS400D DVD, RCA HT VCR ( dont remember the model ) X-Box , and on the bottom are my DVD's a KLIPSCH Mug, and a Dolby Digital equiped HT plaque.

This is where my wires enter the wall to goto the rear channels.

Another Front Shot here you see my crappy tv which I will be replacing with a 27' wega or equivilent flat screen. Here you can see the KSW-12 and my SC-1 center. The TV Stand is a Tech Craft unit as well.

Heres the rear wall where the wires come out and go into my Quintets.

Heres the wires behind the reciever.. Its about as neat as I could get it.

This is just a rear shot by my bed so you can see both rear channels. Hope you guys enjoyed the pics





QuikSR20's Rig HK AVR510 reciever Sony DVP-NS400D DVD Klipsch SB-3 Mains Klipsch SC-1 Center Klipsch Quintet Rears Klipsch KSW-12 Sub Microsoft X-Box with advanced AV pack AR Proseries Interconnects for everything Well I finally got a chance to take some pictures of my Home Theater setup. This is my first crack at a home theater but from hangin around here and reading magazines I have learned a lot and for the budget Im on for a 23 year old student I think I did pretty good. It sounds Awesome. I took lots of time to setup the angles and positioning of the speakers and sub, As well as the time to wire everything nice and neat and use loom to cover wires on the floor. For wires I chose acoustic research they seemed to be a decent wire for the money. I also used bannana clips on all the connectors to the reciever and speakers. Heres a List of the parts and the pictures Enjoy. This shot just shows a picture across the front. The TV is centered in the middle. The Speakers are SB3's on 21' Wood Tech Oak Stands with rubber isolations pads on top and metal spikes on bottom. My Rack is a TECH Craft TC-WF45B from there wing series. Heres a list of the components. HK AVR510 reciever, Sony NS400D DVD, RCA HT VCR ( dont remember the model ) X-Box , and on the bottom are my DVD's a KLIPSCH Mug, and a Dolby Digital equiped HT plaque. This is where my wires enter the wall to goto the rear channels. Another Front Shot here you see my crappy tv which I will be replacing with a 27' wega or equivilent flat screen. Here you can see the KSW-12 and my SC-1 center. The TV Stand is a Tech Craft unit as well. Heres the rear wall where the wires come out and go into my Quintets. Heres the wires behind the reciever.. Its about as neat as I could get it. This is just a rear shot by my bed so you can see both rear channels. Hope you guys enjoyed the pics	Check out these rigs AudioFreak Charlie Tuna Chinman Curmudgeon Dave B Edster00 Frank Carter Justin S Matt B Mike Lindsey Nick Noz Punisher1977 QuikSR20 SavageDDR ShapeShifter Steve and Becky Steven K TeeJay Underhanded Penguin Voodoo Chile